Passive SFP+ Twinax DAC cable 0.5m

Copper RJ45 SFP transceiver, designed with Marvell 88E1111 PHY chip, supporting transmission up to 100 meters over CAT.5e.
● 1000Base-T
● Data rate: 1000 Mbps
● Interface: RJ-45
● Range: 100 meters transmission over CAT.5e
● Cable: CAT.5e cable
● 10Gtek offers inter-manufacturer compatibility service

10GBase-LR Long Range SFP+ Fiber Optic Transceiver. FO 1310nm, distance up to 10 kilometers, dual LC connector.

• 10GBase-LR
•  Data Rate:  10Gb/s
•  Wavelength:  1310nm
•  Reach:  up to 10 km
•  Fiber Type:  single-mode fiber
•  Interface:  Dual LC connectors
• Temp. Range(℃): 0~70
• RoHS

10Gtek offers inter-manufacturer compatibility service

SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks. SFP+ twinax passive cable allows for a serial data transmission up to 10.3Gb/s, which is a low cost choice for very short reach applications of 10GbE or 1-8G Fiber Channel. SFP+ DAC which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly offers the higher density.

• 10GBase-CU
• SFP+ to SFP+ Connetor
• AWG30
• Length: 2 meters
• 2-pair differential twinax cable
• Impedance: 100-ohm
• EEPROM I2C (MCU: customized)
• Compliant to SFP MSA
• Low power consumption
• Excellent EMI performance
• RoHS Compliant
• Temp. Range(℃): 0~70 (Industrial Temp.: customized)

10Gtek offers inter-manufacturer compatibility service

Short Range 10GBase-SR SFP+ Fiber Optic Transceiver. FO 850nm 50/125µm, distance up to 300 meters, duplex LC connector.

• 10GBase-SR
•  Data Rate:  10G, multi-rate
•  Wavelength:  850-nm
•  Reach:  up to 300-meter @ 50/125 μm MMF
•  Fiber Type:  OM3/OM4 multi-mode fiber
•  Interface:  Dual LC connectors
• Compliant with MSA SFP+ Specification SFF-8431
• Compliant with IEEE 802.3ae 10GBase-SR/SW
• Temp. Range(℃): 0~70
• RoHS

10Gtek offers inter-manufacturer compatibility service

SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks. SFP+ twinax passive cable allows for a serial data transmission up to 10.3Gb/s, which is a low cost choice for very short reach applications of 10GbE or 1-8G Fiber Channel. SFP+ DAC which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly offers the higher density.

• 10GBase-CU
• SFP+ to SFP+ Connetor
• AWG30
• Length: 2.5 meters
• 2-pair differential twinax cable
• Impedance: 100-ohm
• EEPROM I2C (MCU: customized)
• Compliant to SFP MSA
• Low power consumption
• Excellent EMI performance
• RoHS Compliant
• Temp. Range(℃): 0~70 (Industrial Temp.: customized)

10Gtek offers inter-manufacturer compatibility service

USB to DB9 Male cable, with Prolific chipset compatible without driver with Windows 8 / 10 or 11.
Length 0.5 m. Compatible with the entire range of EWALL STORE Firewalls with DB9 console
Added a DB9 Female / DB9 Female cable to convert the connection to the Firewall.
The whole guarantees the connection with Putty or MobaXterm to all of our Firewalls.

USB to DB9 Male cable, with Prolific chipset compatible without driver with Windows 8 / 10 or 11.
Length 1.5 m. Compatible with the entire range of EWALL STORE Firewalls with DB9 console
Added a DB9 Female / DB9 Female cable to convert the connection to the Firewall.
The whole guarantees the connection with Putty or MobaXterm to all of our Firewalls.

SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks. SFP+ twinax passive cable allows for a serial data transmission up to 10.3Gb/s, which is a low cost choice for very short reach applications of 10GbE or 1-8G Fiber Channel. SFP+ DAC which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly offers the higher density.

• 10GBase-CU
• SFP+ to SFP+ Connetor
• AWG30
• Length: 1 meters
• 2-pair differential twinax cable
• Impedance: 100-ohm
• EEPROM I2C (MCU: customized)
• Compliant to SFP MSA
• Low power consumption
• Excellent EMI performance
• RoHS Compliant
• Temp. Range(℃): 0~70 (Industrial Temp.: customized)

10Gtek offers inter-manufacturer compatibility service

Multi-rate copper RJ45 SFP transceiver, designed with Marvell 88E1111 PHY chip, supporting transmission up to 100 meters over CAT.5e.
● 100/1000Base-T
● Data rate: 100~1000Mbps multi-rate
● Interface: RJ-45
● Range: 100 meter transmission over CAT.5e
● Cable: CAT.5e cable
● 10Gtek offers compatible service
This module is recommended only if your device supports 100/1000M auto-negotiation, otherwise please DO NOT choose this item, choose ASF-GE-T instead.

SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks. SFP+ twinax passive cable allows for a serial data transmission up to 10.3Gb/s, which is a low cost choice for very short reach applications of 10GbE or 1-8G Fiber Channel. SFP+ DAC which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly offers the higher density.

• 10GBase-CU
• SFP+ to SFP+ Connetor
• AWG30
• Length: 1.5 meters
• 2-pair differential twinax cable
• Impedance: 100-ohm
• EEPROM I2C (MCU: customized)
• Compliant to SFP MSA
• Low power consumption
• Excellent EMI performance
• RoHS Compliant
• Temp. Range(℃): 0~70 (Industrial Temp.: customized)

10Gtek offers inter-manufacturer compatibility service

10GBase-T mult-rate Copper RJ45 SFP+ transceiver, designed in with Marvell 88X3300 PHY chip, supporting up to 80-meter transmission over CAT.6a or CAT.7

• 10GBase-T
• Data Rate: 1.25G/10G, multi-rate
• Interface: RJ-45
• 80 meters transmission over CAT.6a/CAT.7
• Compliant with 10G Base-T IEEE 802.3an
• Compliant with 1000Base-T IEEE 802.3ab
• Compliant with 100Base-TX IEEE 802.3u
• Temp. Range(℃): 0~60
• RoHS

10Gtek offers inter-manufacturer compatibility service

10GBase-T mult-rate Copper RJ45 SFP+ transceiver, designed in with Marvell 88X3300 PHY chip, supporting up to 30-meter transmission over CAT.6a or CAT.7

• 10GBase-T
• Data Rate: 1.25G/10G, multi-rate
• Interface: RJ-45
• 30 meters transmission over CAT.6a/CAT.7
• Compliant with 10G Base-T IEEE 802.3an
• Compliant with 1000Base-T IEEE 802.3ab
• Compliant with 100Base-TX IEEE 802.3u
• Temp. Range(℃): 0~60
• RoHS

10Gtek offers inter-manufacturer compatibility service5

SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks. SFP+ twinax passive cable allows for a serial data transmission up to 10.3Gb/s, which is a low cost choice for very short reach applications of 10GbE or 1-8G Fiber Channel. SFP+ DAC which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly offers the higher density.

• 10GBase-CU
• SFP+ to SFP+ Connetor
• AWG30
• Length: 3 meters
• 2-pair differential twinax cable
• Impedance: 100-ohm
• EEPROM I2C (MCU: customized)
• Compliant to SFP MSA
• Low power consumption
• Excellent EMI performance
• RoHS Compliant
• Temp. Range(℃): 0~70 (Industrial Temp.: customized)

10Gtek offers inter-manufacturer compatibility service

10GBase-LR Long Range SFP+ Fiber Optic Transceiver. FO 1310nm, distance up to 20 kilometers, dual LC connector.

• 10GBase-LR
•  Data Rate:  10Gb/s
•  Wavelength:  1310nm
•  Reach:  up to 20 km
•  Fiber Type:  single-mode fiber
•  Interface:  Dual LC connectors
• Temp. Range(℃): 0~70
• RoHS

10Gtek offers inter-manufacturer compatibility service

10GBase-LR Long Range SFP+ Fiber Optic Transceiver. FO 1310nm, distance up to 40 kilometers, dual LC connector.

• 10GBase-LR
•  Data Rate:  10Gb/s
•  Wavelength:  1310nm
•  Reach:  up to 40 km
•  Fiber Type:  single-mode fiber
•  Interface:  Dual LC connectors
• Temp. Range(℃): 0~70
• RoHS

10Gtek offers inter-manufacturer compatibility service