Transceiver SFP 1000Base-T RJ45 (100m)

SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks. SFP+ twinax passive cable allows for a serial data transmission up to 10.3Gb/s, which is a low cost choice for very short reach applications of 10GbE or 1-8G Fiber Channel. SFP+ DAC which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly offers the higher density.

• 10GBase-CU
• SFP+ to SFP+ Connetor
• AWG30
• Length: 1.5 meters
• 2-pair differential twinax cable
• Impedance: 100-ohm
• EEPROM I2C (MCU: customized)
• Compliant to SFP MSA
• Low power consumption
• Excellent EMI performance
• RoHS Compliant
• Temp. Range(℃): 0~70 (Industrial Temp.: customized)

10Gtek offers inter-manufacturer compatibility service

10GBase-LR Long Range SFP+ Fiber Optic Transceiver. FO 1310nm, distance up to 40 kilometers, dual LC connector.

• 10GBase-LR
•  Data Rate:  10Gb/s
•  Wavelength:  1310nm
•  Reach:  up to 40 km
•  Fiber Type:  single-mode fiber
•  Interface:  Dual LC connectors
• Temp. Range(℃): 0~70
• RoHS

10Gtek offers inter-manufacturer compatibility service

10GBase-T mult-rate Copper RJ45 SFP+ transceiver, designed in with Marvell 88X3300 PHY chip, supporting up to 80-meter transmission over CAT.6a or CAT.7

• 10GBase-T
• Data Rate: 1.25G/10G, multi-rate
• Interface: RJ-45
• 80 meters transmission over CAT.6a/CAT.7
• Compliant with 10G Base-T IEEE 802.3an
• Compliant with 1000Base-T IEEE 802.3ab
• Compliant with 100Base-TX IEEE 802.3u
• Temp. Range(℃): 0~60
• RoHS

10Gtek offers inter-manufacturer compatibility service

SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks. SFP+ twinax passive cable allows for a serial data transmission up to 10.3Gb/s, which is a low cost choice for very short reach applications of 10GbE or 1-8G Fiber Channel. SFP+ DAC which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly offers the higher density.

• 10GBase-CU
• SFP+ to SFP+ Connetor
• AWG30
• Length: 2.5 meters
• 2-pair differential twinax cable
• Impedance: 100-ohm
• EEPROM I2C (MCU: customized)
• Compliant to SFP MSA
• Low power consumption
• Excellent EMI performance
• RoHS Compliant
• Temp. Range(℃): 0~70 (Industrial Temp.: customized)

10Gtek offers inter-manufacturer compatibility service

SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks. SFP+ twinax passive cable allows for a serial data transmission up to 10.3Gb/s, which is a low cost choice for very short reach applications of 10GbE or 1-8G Fiber Channel. SFP+ DAC which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly offers the higher density.

• 10GBase-CU
• SFP+ to SFP+ Connetor
• AWG30
• Length: 2 meters
• 2-pair differential twinax cable
• Impedance: 100-ohm
• EEPROM I2C (MCU: customized)
• Compliant to SFP MSA
• Low power consumption
• Excellent EMI performance
• RoHS Compliant
• Temp. Range(℃): 0~70 (Industrial Temp.: customized)

10Gtek offers inter-manufacturer compatibility service

SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks. SFP+ twinax passive cable allows for a serial data transmission up to 10.3Gb/s, which is a low cost choice for very short reach applications of 10GbE or 1-8G Fiber Channel. SFP+ DAC which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly offers the higher density.

• 10GBase-CU
• SFP+ to SFP+ Connetor
• AWG30
• Length: 3 meters
• 2-pair differential twinax cable
• Impedance: 100-ohm
• EEPROM I2C (MCU: customized)
• Compliant to SFP MSA
• Low power consumption
• Excellent EMI performance
• RoHS Compliant
• Temp. Range(℃): 0~70 (Industrial Temp.: customized)

10Gtek offers inter-manufacturer compatibility service

Multi-rate copper RJ45 SFP transceiver, designed with Marvell 88E1111 PHY chip, supporting transmission up to 100 meters over CAT.5e.
● 100/1000Base-T
● Data rate: 100~1000Mbps multi-rate
● Interface: RJ-45
● Range: 100 meter transmission over CAT.5e
● Cable: CAT.5e cable
● 10Gtek offers compatible service
This module is recommended only if your device supports 100/1000M auto-negotiation, otherwise please DO NOT choose this item, choose ASF-GE-T instead.

SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks. SFP+ twinax passive cable allows for a serial data transmission up to 10.3Gb/s, which is a low cost choice for very short reach applications of 10GbE or 1-8G Fiber Channel. SFP+ DAC which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly offers the higher density.

• 10GBase-CU
• SFP+ to SFP+ Connetor
• AWG30
• Length: 0.5 meters
• 2-pair differential twinax cable
• Impedance: 100-ohm
• EEPROM I2C (MCU: customized)
• Compliant to SFP MSA
• Low power consumption
• Excellent EMI performance
• RoHS Compliant
• Temp. Range(℃): 0~70 (Industrial Temp.: customized)

10Gtek offers inter-manufacturer compatibility service

10GBase-LR Long Range SFP+ Fiber Optic Transceiver. FO 1310nm, distance up to 10 kilometers, dual LC connector.

• 10GBase-LR
•  Data Rate:  10Gb/s
•  Wavelength:  1310nm
•  Reach:  up to 10 km
•  Fiber Type:  single-mode fiber
•  Interface:  Dual LC connectors
• Temp. Range(℃): 0~70
• RoHS

10Gtek offers inter-manufacturer compatibility service

USB to DB9 Male cable, with Prolific chipset compatible without driver with Windows 8 / 10 or 11.
Length 1.5 m. Compatible with the entire range of EWALL STORE Firewalls with DB9 console
Added a DB9 Female / DB9 Female cable to convert the connection to the Firewall.
The whole guarantees the connection with Putty or MobaXterm to all of our Firewalls.

SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks. SFP+ twinax passive cable allows for a serial data transmission up to 10.3Gb/s, which is a low cost choice for very short reach applications of 10GbE or 1-8G Fiber Channel. SFP+ DAC which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly offers the higher density.

• 10GBase-CU
• SFP+ to SFP+ Connetor
• AWG30
• Length: 1 meters
• 2-pair differential twinax cable
• Impedance: 100-ohm
• EEPROM I2C (MCU: customized)
• Compliant to SFP MSA
• Low power consumption
• Excellent EMI performance
• RoHS Compliant
• Temp. Range(℃): 0~70 (Industrial Temp.: customized)

10Gtek offers inter-manufacturer compatibility service

10GBase-LR Long Range SFP+ Fiber Optic Transceiver. FO 1310nm, distance up to 20 kilometers, dual LC connector.

• 10GBase-LR
•  Data Rate:  10Gb/s
•  Wavelength:  1310nm
•  Reach:  up to 20 km
•  Fiber Type:  single-mode fiber
•  Interface:  Dual LC connectors
• Temp. Range(℃): 0~70
• RoHS

10Gtek offers inter-manufacturer compatibility service

10GBase-T mult-rate Copper RJ45 SFP+ transceiver, designed in with Marvell 88X3300 PHY chip, supporting up to 30-meter transmission over CAT.6a or CAT.7

• 10GBase-T
• Data Rate: 1.25G/10G, multi-rate
• Interface: RJ-45
• 30 meters transmission over CAT.6a/CAT.7
• Compliant with 10G Base-T IEEE 802.3an
• Compliant with 1000Base-T IEEE 802.3ab
• Compliant with 100Base-TX IEEE 802.3u
• Temp. Range(℃): 0~60
• RoHS

10Gtek offers inter-manufacturer compatibility service5

USB to DB9 Male cable, with Prolific chipset compatible without driver with Windows 8 / 10 or 11.
Length 0.5 m. Compatible with the entire range of EWALL STORE Firewalls with DB9 console
Added a DB9 Female / DB9 Female cable to convert the connection to the Firewall.
The whole guarantees the connection with Putty or MobaXterm to all of our Firewalls.

Short Range 10GBase-SR SFP+ Fiber Optic Transceiver. FO 850nm 50/125µm, distance up to 300 meters, duplex LC connector.

• 10GBase-SR
•  Data Rate:  10G, multi-rate
•  Wavelength:  850-nm
•  Reach:  up to 300-meter @ 50/125 μm MMF
•  Fiber Type:  OM3/OM4 multi-mode fiber
•  Interface:  Dual LC connectors
• Compliant with MSA SFP+ Specification SFF-8431
• Compliant with IEEE 802.3ae 10GBase-SR/SW
• Temp. Range(℃): 0~70
• RoHS

10Gtek offers inter-manufacturer compatibility service